English
Français
Deutsch
Português
Español
русский 
한국어
العربية
Italiano
Indonesia
Schweiz
Polski
Nederlands
ישראל - עברית
Perzisch
ไทย
日本語
ኢትዮ-አማርኛ
Việt Nam
Kiswahili
Srpski
Ελληνικά
繁體中文-
How to connect the terminals of the EC new fan and the new fan?
we talked about that the input port and output port of the old model are separated, and the input end is divided into analog input and digital input. The biggest difference between the new model and the old model is that the new model combines the input and output settings together. There are three IO ports, namely IO1, IO2 and IO3. I represents input (IN) and O represents output (OUT). So what are the specific functions of these three IO ports?02/22/2024 -
How to wire the terminals of EC old and new fans?
Wiring of EC old fan. The old model divided the input port into digital input and analog input.02/22/2024 -
How to Wire PWM Speed Regulation?
PWM (Pulse Width Modulation) is a technology that equivalently obtains the required signal by modulating the width of a series of pulses.02/21/2024 -
What are the speed regulating fans for fans?
By adjusting the speed, fans can meet the requirements in different environments and working conditions.02/21/2024 -
How to wire and configure software during communication debugging of EC fan 485?
Let's take this R3G355-RG56-01 as an example. In the wiring part, we need to connect two sets of wires. One set is a three-phase power line to ensure that the fan is powered on and running during the debugging process. The other set is an RS485 communication line which needs to be connected to our computer using a serial port converter.02/02/2024 -
What are the installation requirements for the guide ring of a backward centrifugal fan?
The installation requirements for the inlet ring of the backward centrifugal fan include: installation position, installation angle and installation clearance, etc. Among them, the installation clearance has a certain influence on the performance of the fan.02/02/2024
