English
Français
Deutsch
Português
Español
русский 
한국어
العربية
Italiano
Indonesia
Schweiz
Polski
Nederlands
ישראל - עברית
Perzisch
ไทย
日本語
ኢትዮ-አማርኛ
Việt Nam
Kiswahili
Srpski
Ελληνικά
繁體中文Product
Back
- ebmpapst
- ZIEHL-ABEGG
- Rosenberg
- DELTA
- Nicotra Gebhardt
- S&P
- Wistro
- SANYO
- FULLTECH
- SANMU
- SUNON
-
HVAC Controls & Components
-
Sanhua
4 Way Reversing Vavle Electronic Expansion Valve Driver Electronic Expansion Valve Electronic Shut-off Valve Ball Valve Electronic Expansion Valve Controller Refrigerated Cabinet Controller Pressure Transducer Solenoid Valve Thermostatic Expansion Valve Pressure Control Check Valve Sight Glass Pressure Regulator Liquid Injector Brass Service Valve Charge Valve Filter Drier Drain Pump Accumulator Liquid Receiver Oil Separator
-
Fengshen
Pressure Control Differential Pressure Control Temperature Control Flow Switch Pressure Controlled Water Valve Evaporation Pressure Regulating Valve Temperature Controlled Water Valve Solenoid Valve Thermostatic Expansion Valve Temperature Responsive Expansion Valve Constant Pressure Expansion Valve (Hot Gas Bypass) Pilot and Main Valve Forerunner Pressure Regulating Valve Sight Glass
- Magic
-
Sanhua
- Accessories
TC Series Temperature Controls
Brand：
Fengshen
Category：
Temperature Control
Description：
Ts thermostat housing capillary temperature Tb temperature sensing package temperature
1）The temperature sensor package must always be placed at a lower temperature than the capillary of the controller housing, so that the performance of the temperature controller will not be affected by the ambient temperature.
2）The temperature sensor can be placed at a lower or higher temperature than the capillary of the controller housing, but the performance accuracy of the thermostat will be affected when the ambient temperature deviates from 20 °C.
1）The temperature sensor package must always be placed at a lower temperature than the capillary of the controller housing, so that the performance of the temperature controller will not be affected by the ambient temperature.
2）The temperature sensor can be placed at a lower or higher temperature than the capillary of the controller housing, but the performance accuracy of the thermostat will be affected when the ambient temperature deviates from 20 °C.
Description
